Mueller® 110 Compression Connection

Mueller® 110 Compression Connection

Mueller 110® Compression Connection Fittings.

Catalog numbers: H-13130, H-13131, H-13132

Features:

  • Fluorocarbon Coating on inside of compression nut reduces torque required to "bottom" nut.
  • Available in conductive and insulating styles.
  • Rated Category 1 for PE pipe.
  • Visual final inspection of joint is possible because connection nut makes metal-to-metal contact (bottoms) with machine shoulder on spud when joint is properly made.
  • Fully confined gasket designed to eliminate cold flow and "creep."
  • Gripper band is completely confined in gasket and overlaps itself to provide uniform pressure on tubing.
  • Simple installation clean the end of the tubing, stab the tubing into the fitting and tighten the nut until it bottoms. No heating, no flaring, no cementing, no special tools and no special training.

_
PDF Catalog

Mueller transition fittings are used to connect 3/4" steel pipe to 1/2" or 5/8" copper, steel or plastic tubing or 3/4" IPS plastic pipe. These fittings are available with either the Mueller 110® Compression Connection or Mueller 112® Compression Connection .

The 110 connection is used on steel, copper or plastic O.D. controlled tubing and the 112 connection is used on plastic IPS pipe or CTS tubing only. Both of these connections meet or exceed joint requirements of D.O.T. Section 192.283(b).

These transition fittings can be attached to 3/4" pipe, fittings or valves via external threads (M.I.P.), internal threads (F.I.P.) or welding (3/4" butt weld or 1/2" socket weld).

H-13130 Transition Fitting

Internal iron pipe thread (FIP) X insulated CTS Mueller 110 Compression Connection for steel or copper tubing.

Size*: 3/4" x 5/8"

H-13131 Transition Fitting

Internal iron pipe thread (FIP) X CTS Mueller 110 Compression Connection for steel or copper tubing.

 

Size*: 3/4" x 5/8"

H-13132 Transition Fitting

Internal iron pipe thread (FIP) X CTS Mueller 110 Compression Connection with insert for plastic tubing having .090" wall thickness.

Size*: 3/4" x 5/8"

Mueller 110 Compression Connections will fit tubing that meets the dimensional requirements listed below:

Nominal Size of Connection

Nominal O.D. of Tubing

Tubing

O.D. Range (inches)

Tubing I.D. Range (inches)

5/8"

5/8"

.621 to .629

.426 to .449

5/8"

5/8"

.621 to .629

.426 to .449

 

*Nominal, first number is size of thredded end, second number is size of Compression Connection.

 

 

Mueller 110 Compression Connection Replacement parts:

Fitting Catalog Number And Nominal Size

Replaceable Parts

Compression Nut

Gasket Assembly

Insert

Insulator

3/4" x 5/8" H-13130

504866

89385

-

504264

3/4" x 5/8" H-13131

504258

89389

-

-

3/4" x 5/8" H-13132

504258

89389

504570

-