H-17507
H-17507
Mueller® H-17507 Flanged Tee.
Catalog number: H-17507
Features:
- Sizes – 4"‡
- For use on steel pipe only
- For no contour or bevel at inlet, use H-17507-99000
- O-ring sealed steel (ASTM A216 GR. WCB) Completion Plug with equalizing valve
- Flange and Completion Cap are forged steel (ASTM A105)
- Tee body is forged steel (ASTM A234, Grade WPB)
- Class 400 flange complies with dimensional requirements of ANSI B16.5
- 800 psig** (5515 kPa) maximum working pressure
‡ Requires minimum ordering quantity. Contact MUELLER Customer Service Center for minimum ordering requirements and availability.
Pipe Dimension:
Size* of Line Stopper Fitting | Size of pipe tee Is Contoured For | Outside Diameter of Shell Cutter Required | Outside Diameter of pipe | pipe Dimensions | ||
Maximum Wall thickness | Minimum Wall thickness | Maximum Inside Diameter | ||||
4" | 6" | 3-1/2" | 4.500" | No limit | .188" | 4.124" |
Drilling/Line Stopping Machine combinations that can be used to install and stop-off H-17507 tees:
Drilling Machine | Line Stopper Units | ||
Unit No.2 | Unit No.3 SW | Unit No. 3SW-500 | |
H-17507 | |||
C1-36 | 4" | 4" | 4" |
Replacement parts:
Fitting Size* | Completion Cap | test plug | Completion Cap Bolts and Nuts (No. Required) | Completion Cap Gasket | Completion plug Assembly | O-ring Seal |
6" | 42039 | 64134 | 43912 (8) | 36377 | 83490 | 43917 |
Equipment required to install and stop-off H-17507 Flanged tee:
Ttool Name | Quantity Required | Line Stopper Unit No. 2 |
4" H-17507 | ||
Drilling Machine | 1 | C1-36 |
Stopping Machine | 1 | H-17235 |
Gate Valve | 1 | 88611 |
Valve Adapter | 1 | 37153 |
Drilling Machine Adapter | 1 | 36343 |
Cutter Arbor | 1 | 88340 |
Shell Cutter | 1 | 3-1/2" 33519 |
Pilot Drill | 1 | 33976 |
Expanding Rubber Stopper | 1 | 83506 |
Completion Machine | 1 | H-17246 (optional) |
Plug Alignment Tool | 1 | 83522 |
Plug Inserting Tool | 1 | 83520 |
Plug Extracting Tool | 1 | 83521 |
Completion Plug Wrench | 1 | 36404 |
Inspection Flange | 1 | H-17619 |
Tool Name | Qty. Req'd. | Line Stopper Unit No. 3SW | Line Stopper Unit No. 3SW-500 |
4" H-17507 | 4" H-17507 | ||
Drilling Machine | 1 | C1-36 | C1-36 |
Stopping Machine | 1 | H-17340 | - |
Gate Valve | 1 | 83953 | 83721 |
Valve Adapter | 1 | 83697 | 500021 |
Drilling Machine Adapter | 1 | 36545 | 89341 |
Cutter Arbor | 1 | 88340 | 88340 |
Shell Cutter | 1 | 3-1/2" 33519 | 3-1/2" 33519 |
Pilot Drill | 1 | 33976 | 33976 |
Expanding Rubber Stopper | 1 | 83506 | - |
Stopper Adapter | 1 | 528161 | - |
Completion Machine | 1 | H-17346 | H-17347 |
Plug Alignment Tool | 1 | 83774 | 83774 |
Plug Inserting Tool | 1 | 83772 | 83772 |
Plug Extracting Tool | 1 | 83773 | 83773 |
Completion Plug Wrench | 1 | 36404 | 36404 |
Inspection Flange | 1 | H-17619 | H-17619 |