511-519 Series
511-519 Series
Mueller® 511 - 519 Xtra-Range Servi-Seal Pipe Repair Clamps - with integral 3/4" through 2" IP threaded service outlet - for 4" through 36" cast iron and steel pipe.
IMPORTANT: MUELLER PIPE REPAIR CLAMPS have demonstrated their capability to seal against gas pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of the bolt tightening (where there is more than one bolt) as well as the type of extent of pipe damage, surface condition of the pipe, environmental conditions and installation workmanship.Metallic components of repair clamps, including stainless steel, corrode at widely variable rates depending upon many factors, such as installation outdoors or underground, composition of surrounding atmosphere/soil, presence of stray currents, moisture or chemicals, etc. Consequently, repair clamps must be assumed to have a finite service life. Consult with a corrosion professional to determine the life expectancy of this repair clamp taking into consideration all appropriate factors in the application. The piping system designer should determine the suitability of this type product on your particular system. Unforeseen failure of this product could result if these precautions are not taken. Mueller Co. can provide additional material specification information on request by contacting Customer Service: 800-798-3131.
Mueller 511 - 519 Xtra-Range Servi-Seal Pipe Repair Clamps - with integral 3/4" through 2" IP threaded service outlet - for 4" through 36" cast iron and steel pipe.
To specify the catalog number, provide the following information:
1. Style number – see chart below
2. Length – standard lengths can be found on the OD chart on the following page
3. Size number – refer to the OD chart on the following page after verifying pipe OD
4. Catalog number prefix for optional features, if desired
The catalog number for a Xtra-Range Servi-Seal Repair Clamp, with 3/4" IP thread tapped outlet, 12" clamp length for 6" cast iron pipe is 511-12-0675.
Clamp Style Number:
Style Number | Size and Type of Outlet Tapping Thread | O.D. Ranges Available* |
511 | 3/4" IP | 4.70-39.16 |
513 | 1" IP | 4.70-39.16 |
515 | 1-1/4" IP | 4.70-39.16 |
517 | 1-1/2" IP | 4.70-39.16 |
519 | 2" IP | 4.70-39.16 |
Extra Bolts and Nuts for Mueller Xtra-Range Full Seal Repair Clamps:
Clamp Size | Bolt Size | Bolt part number | Nut part number |
4"-36" | 5/8" x 6" (Standard Bolt) | 533937 | 195236 |
4"-36" | 5/8" x 7" (Starter Bolt) | 533938 | 526655 |
Stainless Steel Bolts:
For optional 304L stainless steel bolts, washers and nuts, add “S-” prefix to clamp catalog number.
Example: S-511-12-0675
Deep Socket Wrenchs:
Specially designed for use with Mueller Full- Seal Repair Clamps. Long ratchet handle has thumb-tip reverse. Deep sockets (3-1/4") have double hex (12 pt.) and 1/2" square drive.
Part Number | Description |
515207 | 1-1/16" Socket |
515204 | 15-3/4" with 1/2" reversible Ratchet Handle |
Bonding Device for Cathodic Protection:
Metallic conductors are set in the gasket to provide contact between the band and the pipe sur- face and are available on all 500 series clamps. These conductors permit electrical current flow by establishing positive contact with pipe and band on each side of the pipe crack or break
To specify optional bonding device for cathodic protection, add a prefix of "2-" to catalog number.
Example: 2-511-12-0675
MUELLER® 510 SERIES XTRA-RANGE® SERVI-SEAL® PIPE REPAIR CLAMPS:
Mueller 511-519 Xtra-Range Servi-Seal Pipe Repair Clamps – for 4" through 36" cast iron and steel pipe. Standard Lengths: 6", 7-1/2", 9", 10", 12", 15", 18", 20", 24", 30".
NominalPipe Size |
ClampSize Number | Clamp O.D. Range* |
Cast Iron |
Steel | |||
Inches | Millimeters | ||||||
Min. | Max. | Min. | Max. | ||||
4" | 0470 | 4.70 | 5.50 | 119.4 | 139.7 | 50-250,A,B,C,D | - |
6" | 0662 | 6.62 | 7.42 | 168.1 | 188.5 | - | STD |
6" | 0675 | 6.75 | 7.55 | 171.5 | 191.7 | 50-250,A,B,C,D | - |
8" | 0862 | 8.62 | 9.42 | 218.9 | 239.3 | - | STD |
8" | 0888 | 8.88 | 9.68 | 225.6 | 245.8 | 50-250,A,B,C,D | - |
10" | 1072 | 10.72 | 11.72 | 272.3 | 297.7 | - | STD |
10" | 1105 | 11.05 | 12.05 | 280.7 | 306.0 | 50-250,A,B,C,D | 12" O.D. |
12" | 1246 | 12.46 | 13.26 | 316.5 | 336.8 | - | STD |
12" | 1310 | 13.10 | 14.30 | 332.8 | 363.2 | 50-250,A,B,C,D | 14" |
14" | 1433 | 14.33 | 15.13 | 364.0 | 384.3 | - | - |
14" | 1510 | 15.10 | 15.90 | 383.6 | 403.8 | 50-250,A,B,C,D | - |
16" | 1590 | 15.90 | 16.70 | 403.9 | 424.1 | - | 16" |
16" | 1655 | 16.55 | 17.35 | 420.4 | 440.6 | - | - |
16" | 1720 | 17.20 | 18.00 | 436.9 | 457.2 | 50-250,A,B,C,D | - |
18" | 1760 | 17.60 | 18.40 | 447.1 | 467.3 | - | 18" |
18" | 1841 | 18.41 | 19.21 | 467.7 | 487.9 | - | - |
18" | 1922 | 19.22 | 20.02 | 488.2 | 508.5 | 50-250,A,B,C,D | - |
20" | 1990 | 19.90 | 20.70 | 505.5 | 525.7 | - | 20" |
20" | 2070 | 20.70 | 21.50 | 525.8 | 546.1 | - | - |
20" | 2145 | 21.45 | 22.25 | 544.9 | 565.1 | 50-250,A,B,C,D | 22" |
20" | 2220 | 22.20 | 23.00 | 563.9 | 584.2 | - | - |
20" | 2280 | 22.80 | 23.60 | 579.2 | 599.4 | - | - |
24" | 2344 | 23.44 | 24.24 | 595.4 | 615.6 | - | 24" |
24" | 2420 | 24.20 | 25.00 | 614.7 | 635.0 | - | - |
24" | 2490 | 24.90 | 25.70 | 632.5 | 652.7 | - | - |
24" | 2566 | 25.66 | 26.46 | 651.8 | 672.0 | 50-250,A,B,C,D | 26" |
24" | 2672 | 26.72 | 27.52 | 678.7 | 699.0 | - | - |
24" | 2772 | 27.72 | 28.52 | 704.1 | 724.4 | - | 28" |
24" | 2863 | 28.63 | 29.83 | 727.3 | 757.6 | - | - |
24" | 2957 | 29.57 | 30.77 | 751.1 | 781.5 | - | 30" |
30" | 3122 | 31.22 | 32.42 | 793.0 | 823.5 | - | - |
36" | 3786 | 37.86 | 39.16 | 961.6 | 994.7 | - | - |
IMPORTANT: MUELLER PIPE REPAIR CLAMPS have demonstrated their capability to seal against gas pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of the bolt tightening (where there is more than one bolt) as well as the type of extent of pipe damage, surface condition of the pipe, environmental conditions and installation workmanship.
Metallic components of repair clamps, including stainless steel, corrode at widely variable rates depending upon many factors, such as installation outdoors or underground, composition of surrounding atmosphere/soil, presence of stray currents, moisture or chemicals, etc. Consequently, repair clamps must be assumed to have a finite service life. Consult with a corrosion professional to determine the life expectancy of this repair clamp taking into consideration all appropriate factors in the application. The piping system designer should determine the suitability of this type product on your particular system. Unforeseen failure of this product could result if these precautions are not taken. Mueller Co. can provide additional material specification information on request by contacting Customer Service: 800-798-3131.
Typical Single Section Full-Seal Clamp - Style Number 511-519:
Starter Nut:
Standard Bolt & Nut:
Deep Socket Wrenchs:
Bonding Device:
Add-on Feature:
