H-17192

Mueller^® NO-BLO^® Low Pressure Line Stopper Fitting Welding Type - Thin Wall Stell Pipe - 250 psig.

Catalog number: H-17192

Specifications:

Sizes – 3" and 4"
Forged Steel Body ASTM A105
Cast Iron Completion Cap ASTM A126 CL.B
For use on thin wall steel pipe only
O-ring sealed cast iron Completion Plug (4" size has equalizing valve)
Contoured base of fitting speeds installation
Reduced wall fitting to facilitate welding to thin wall pipe
250 psig* (1724 kPa)

*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimension:

Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required	Outside Diameter of Pipe	Pipe Dimensions
Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required	Outside Diameter of Pipe	Maximum Wall Thickness	Minimum Wall Thickness	Maximum Inside Diameter
3"	2-3/4"	3.500"	.216"	.138"	3.259"
4"	3-3/4"	4.500"	.237"	.156"	4.233"

Replacement Parts:

Fitting Size	Completion Cap	Completion Plug Only†	Completion Plug O-ring Seal	Equalizing Valve Assembly
3"	36312	502955	503164	N/A
4"	502944	502943	60192	580912

†Without O-ring or equalizing valve on 4" fitting.

Equipment

How to select equipment:

Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

D-5/DH-5 Machine & H-17135 Stopping Machine

H-17192	3"	3"	4"	3" Unit 1	4"Unit1
Control Valve	H-10914 3"	H-10917 3"	H-10917 4"
Bushing	-	-	-
Installation
Test Cap	36813	36813	502929
Completion Plug Wrench	581264	581264	36404
Drilling
MAOP*	125psig	250psig	250psig
Power Operator	H-604	H-604	H-604
Machine Adapter	580918	580918	580906
Boring Bar Adapter	-	-	502936
CutterHolder	33316	33316	502937
Shell Cutter Complete	89351 2-3/4"	89351 2-3/4"	89352 3-3/4"
Chip Sweeper	580902	580902	580902
Chip Sweeper Bushing	51062	51062	502939
Chip Sweeper Magnet	682081	682081	682081
Cutting Grease	88366	88366	88366
Honing Stone	682560	6825060	682560
Componenets of Shell Cutter
Arbor	580907	580907	580907
Shell Cutter	504223	504223	504224
PilotDrill	502932	502932	502932
Stopping
MAOP*	100 psig	100 psig	100 psig	100 psig	100 psig
Machine Adapter	580918	580918	580906	503499	89156
Stopper Holder	502937	502937	502937
Solid Rubber Stopper	89994	89994	89995	89994	89995
Replacement Rubber Only	505846	505846	505848	505846	505848
Bypass Adapter	89946	59946	89948
Rubber Stopper Holder	502937	502937	502937	503496	504133
Bypass Rubber Stopper	89945	89945	89947
Replacement Rubber Only	508425	508425	508324
Rubber Stopper Lubricant	580657	580657	580657	580657	580657
Inserting
MAOP*	125 psig	250 psig	250 psig	125 psig	125 psig
Machine Adapter	580918	580918	580906	503499	89156
Boring Bar Adapter	40438	40438	502937
Inserting Tool	580921	580921	580908	89151	580908
Extracting
MAOP*	125 psig	250 psig	250 psig	125 psig	125 psig
Machine Adapter	580918	580918	580906	503499	89156
Extracting Tool	580919	580919	580913	89152	89153

*Maximum Allowable Operating Pressure