H-17125

Mueller^® NO-BLO^® Line Stopper Fitting O-Ring Sealed Completion Plug Welding Type - 250 psig.

Catalog number: H-17125

Specifications:

Size – 2"
For use on steel pipe only
Fitting top and bottom halves are forged steel (ASTM A105)
O-ring sealed Completion Plug makes primary seal
Cast Iron Completion Cap makes secondary seal
250 psig* (1724kPa)

*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimensions:

Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required (Inches)	Outside Diameter of Pipe (Inches)
2"	2.250	2.375

Replacement Parts:

Replacement Parts	Size of Fitting
Replacement Parts	2"
Completion Cap	36312
Completion Plug	501707
Completion Plug O-ring	79506

Equipment

How to select equipment:

Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

D-5™/DH-5™ and Unit #1 Machine

H-17125	2"	2"
Control Valve	H-10914 3"	H-10917 3"
Bushing	-	507783
Installation
Test Cap	36813	36813
Completion Plug Wrench	581264	581264
Drilling
MAOP*	125 psig	250 psig
Power Operator	H-604	H-604
Machine Adapter	36376	36376
Cutter Arbor	88470	88470
Shell Cutter	36337 2-1/4"	36337 2-1/4"
Pilot Drill	36336	36336
Cutting Grease	88366	88366
Honing Stone	682560	682560
Stopping
MAOP*	125 psig	125 psig
Stopping Machine	H-17135	H-17135
Machine Adapter	501717	501717
Solid Rubber Stopper	88478	88478
Replacement Rubber	36290	36290
Top Bypass Rubber Stopper	88471	88471
Replacement Rubber	36298	36298
Full Bypass Rubber Stopper	680513	680513
Replacement Rubber	509446	509446
Rubber Stopper Lubricant	580657	580657
Inserting
MAOP*	125 psig	125 psig
Inserting Machine	H-17135	H-17135
Inserting Machine Adapter	501717	501717
Inserting Tool	580940	580940
Extracting
MAOP*	125 psig	125 psig
Extracting Machine	H-17135	H-17135
Extracting Machine Adapter	501717	501717
Extracting Tool	580941	580941

D-5™/DH-5™ Machine

H-17125	2"
Control Valve	H-10918 3"
Bushing	-
Installation
Test Cap	036813
Completion Plug Wrench	581264
Drilling
MAOP*	250 psig
Power Operator	H-604
Machine Adapter	47394
Machine Adapter Bushing	507783
Boring Bar Extension	64297
Cutter Arbor	88470
Shell Cutter	36337
Pilot Drill	36336
Cutting Grease	88366
Honing Stone	682560
Stopping
MAOP*	250 psig
Stopping Machine	D-5/DH-5
Machine Adapter	89946
Stopper Holder	580932†
Solid Rubber Stopper	88478
Replacement Rubber	36290
Top Bypass Rubber Stopper	88471
Replacement Rubber	36298
Full Bypass Rubber Stopper	680513
Replacement Rubber	509446
Rubber Stopper Lubricant	580657
Inserting
MAOP*	250 psig
Inserting Machine	D-5/DH-5
Machine Adapter	47394
Boring Bar Adapter Extension	64297
Inserting Tool	36190
Extracting
MAOP*	250 psig
Extracting Machine	D-5/DH-5
Machine Adapter	47394
Extracting Tool Adapter	36198
Extracting Tool	83213

*Maximum Allowable Operating Pressure