H-17165

Mueller^® NO-BLO^® Line Stopper Fitting Mechanical Joint - Steel or Cast Iron Pipe - 125 psig.

Catalog number: H-17165

Specifications:

Sizes – 2", 2-1/4"
For use on steel or cast iron pipe only
Mechanical Joint
Fitting top and bottom halves are Cast Iron ASTM A126 CL.B
Completion Plug makes primary seal
Cast Iron Completion Cap makes secondary seal
125 psig* (862kPa)

*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimensions:

Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required (Inches)	Outside Diameter of Pipe (Inches)
2"	2.250	2.375 to 2.531
2-1/4"	2.625	2.750

Replacement Parts:

Replacement Parts	Size of Fitting
Replacement Parts	2"	2-1/4"
Completion Cap	528469	528469
Completion Plug	36303	36402

Equipment

How to select equipment:

Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

D-5™/DH-5™ and Unit#1Machine

H-17165	2"	2"	2-1/4"	2-1/4"
Control Valve	H-10914 3"	H-10917 3"	H-10914 3"	H-10917 3"
Bushing	-	507783	-	507783
Installation
Test Cap	36813	36813	36813	36813
Completion Plug Wrench	581264	581264	581264	581264
Drilling
MAOP*	125 psig	125 psig	125 psig	125 psig
Power Operator	H-604	H-604	H-604	H-604
Machine Adapter	36376	36376	36376	36376
Cutter Arbor	88470	88470	88601	88601
Shell Cutter	36337 2-1/4"	36337 2-1/4"	36374 2-5/8"	36374 2-5/8"
Pilot Drill	36336	36336	36336	36336
Cutting Grease	88366	88366	88366	88366
Honing Stone	682560	682560	682560	682560
Stopping
MAOP*	125 psig	125 psig	125 psig	125 psig
Stopping Machine	H-17135	H-17135	H-17135	H-17135
Stopping Machine Adapter	36370	36370	36370	36370
Solid Rubber Stopper	88478	88478	88482	88482
Replacement Rubber	36290	36290	36283	36283
Top Bypass Rubber Stopper	88471	88471	88485	88485
Replacement Rubber	36298	36298	36372	36372
Full Bypass Rubber Stopper	680513	680513	-	-
Replacement Rubber	509446	509446	-	-
Rubber Stopper Lubricant	580657	580657	580657	580657
Inserting
MAOP*	125 psig	125 psig	125 psig	125 psig
Inserting Machine	H-17135	H-17135	H-17135	H-17135
Inserting Machine Adapter	36370	36370	36370	36370
Inserting Tool	580940	580940	580940	580940
Extracting
MAOP*	125 psig	125 psig	125 psig	125 psig
Extracting Machine	H-17135	H-17135	H-17135	H-17135
Extracting Machine Adapter	36370	36370	36370	36370
Extracting Tool	580941	580941	580941	580941

*MaximumAllowable Operating Pressure