H-17470

Mueller^® Spherical Line Stopper Fitting Welding Type - 285 psig.

Catalog number: H-17470

Specifications:

Sizes – 4x3", 4", 6", 8"
For use on steel pipe only, with outlet sized for standard schedule 40 steel pipe
O-ring sealed cast iron (ASTM A126 CL.B) Completion Plug with equalizing valve
Completion Cap (ASTM A126 CL.B)
Flange, fitting top and bottom halves are forged steel (ASTM A105)
Class 150 flange complies with dimensional requirements of ANSI B16.5
285 psig** (1965 kpa) maximum working pressure at 100F (38C)

**This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimension:

*Size of Line Stopper Fitting**	Outside Diameter of Shell Cutter Required	Outside Diameter of pipe	Pipe Dimensions
*Size of Line Stopper Fitting**	Outside Diameter of Shell Cutter Required	Outside Diameter of pipe	Maximum Wall thickness	Minimum Wall thickness	Maximum Inside Diameter	Inside Diameter of Outlet
4"x3"	4-1/4"	3.50"	No limit	No limit	No limit	4.031"
4"	4-1/4"	4.500"	No limit	.188"	4.124"	4.031"
6"	6-1/4"	6.625"	.432" (sch. 80)	.250"	6.125"	6.25"
8"	8-1/4"	8.625"	.406" (sch. 60)	.250"	8.125"	8.843"

Drilling/Line Stopping Machine combinations that can be used to install and stop-off H-17270 Fittings:

Drilling Machine	Line Stopper Units
	Unit No. 3SW	Unit No. 3SW-500
	H-17270
C1-36	4" x 3", 4" and 6"	4" x 3", 4" and 6"

Replacement parts:

Fitting Size*	Completion Cap	Test plug	Completion Cap Bolts and Nuts (No. Required)	Completion Cap Gasket	Completion plug Assembly	O-ring Seal
4x3"	36592	64134	36731 (8)	36377	83485	43917
4"	36592	64134	36731 (8)	36377	83485	43917
6"	36609	64134	36446 (8)	62945	682702	79477
8"	36625	64134	503709 (8)	63094	682703	63359

*Nominal

Equipment

Equipment required to install and stop-off H-17470 welding Line Stopper Fittings:

Tool Name	Quantity Required	Line Stopper Unit No. 3SW			Line Stopper Unit No. 3SW-500
Tool Name	Quantity Required	4" H-17470	6" H-17470	8" H-17470	4" H-17470	6" H-17470	8" H-17470
Drilling Machine	1	C1-36	C1-36	C1-36	C1-36	C1-36	C1-36
Stopping Machine	2	H-17340	H-17340	H-17340	H-17342	H-17342	H-17342
Gate Valve	2	83953	83953	83953	83721	83721	83721
Valve Adapter	2	83513	501223	-	501361	63205	63193**
Drilling Machine Adapter	1	36545	36545	36545	83730	83730	83730
Cutter Hub	1	54526	54501	54653	54526	54501	54653
Shell Cutter	1	36472	36548	36521	36472	36548	36521
Pilot Drill	1	580585	580585	580586	580585	580585	580586
Steel Wedge Stopper	2	89694	89696	89698	89694	89696	89698
Bottom Stopper	2	681992	681994	681996	681992	681994*	681996
Completion Machine	1	H-17346	H-17346	H-17346	H-17347	H-17347	H-17347
Plug Alignment Tool	1	83774	83250	83250	83774	83250	83250
Plug Inserting Tool	1	83772	83237	83237	83772	83237	83237
Plug Extracting Tool	1	83773	83238	83238	83773	83238	83238
Completion Plug Wrench	1	36404	36424	36424	36404	36424	36424
Thread Cleaning Tool	1	680360	89319	89319	680360	89319	89319
Inspection Flange	1	H-17619	H-17619	H-17619	H-17619	H-17619	H-17619

*For Bottom Stop use Valve Adapter 682687 instead of listed Valve Adapter.
**For Bottom Stop use Valve Adapter 537365 instead of listed Valve Adapter.