H-17356

Mueller^® Side-Out Stopper Fitting Welding Type - 720 PSIG

Catalog number: H-17356

Specifications:

Sizes – 4", 6", 8"
For use on steel pipe only
O-ring sealed steel (ASTM A216 GR. WCB) Completion Plug with equalizing valve
Flange, Completion Cap, fitting top and bottom halves are forged
steel (ASTM A105)
Pipe pup included for alternative welding options.
Class 300 flange complies with dimensional requirements of ANSI B16.5
720 psig** (4964 kPa) maximum working pressure at 100F (38C)

**This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimension:

*Size of Line Stopper Fitting**	Outside Diameter of Shell Cutter Required	Outside Diameter of pipe	Pipe Dimensions
*Size of Line Stopper Fitting**	Outside Diameter of Shell Cutter Required	Outside Diameter of pipe	Maximum Wall thickness	Minimum Wall thickness	Maximum Inside Diameter
4"	4-1/4"	4.500"	No limit	.188"	4.124"
6"	6-1/4"	6.625"	.432" (sch. 80)	.250"	6.125"
8"	8-1/4"	8.625"	.406" (sch. 60)	.250"	8.125"

Drilling/Line Stopping Machine combinations that can be used to install and stop-off H-17356 Fittings:

Drilling Machine	Line Stopper Units
	Unit No.2	Unit No.3	Unit No. 3SW	Unit No. 3SW-500
	H-17356
C1-36	4"	6" and 8"	4", 6", and 8"	4", 6", and 8"

Replacement parts:

Fitting Size*	Completion Cap	Test plug	Completion Cap Bolts and Nuts(No. Required)	Completion Cap Gasket	Completion plug Assembly	O-ring Seal	Pipe pup
4"	64204	64134	43911 (8)	36377	83490	43917	528748
6"	64205	64134	500894 (12)	62945	83491	79895	528752
8"	64206	64134	43908 (12)	63057	83492	79020	528756

*Nominal

Equipment

Equipment required to install and stop-off H-17356 welding Line Stopper Fittings:

Tool Name	Quantity Required	Line Stopper Unit No. 2	Line Stopper Unit No. 3
Tool Name	Quantity Required	4" H-17356	6" H-17356	8" H-17356
Drilling Machine	1	C1-36	C1-36	C1-36
Stopping Machine	2	H-17235	H-17335	H-17335
Gate Valve	2	88611	83953	83953
Valve Adapter	2	37153	501224	502289
Drilling Machine Adapter	1	36343	36545	36545
Cutter Hub	1	54526	54501	54653
Shell Cutter	1	36472	36548	36521
Pilot Drill	1	580585	580585	580586
Solid Rubber Stopper	2	88614	682365	88699
Top Bypass Rubber Stopper	2	88613	-	-
Full Bypass Rubber Stopper	2	680515	682364	680517
Completion Machine	1	H-17246	H-17345	H-17345
Plug AlignmentTool	1	83522	83519	83519
Plug Inserting Tool	1	83520	83517	83517
Plug Extracting Tool	1	83521	83518	83518
Completion Plug Wrench	1	36404	36424	36424
Inserting Bar Ext. Spacer	2	79403	36991	36991
Inserting Bar Ext. Sleeve	2	79402	36992	36992
Tool Adapter	2	-	37197	37197
Retaining Screw Wrench	1	-	88475	88475
Thread Cleaning Tool	1	89317	89318	89318
Inspection Flange	1	H-17619	H-17619	H-17619

Tool Name	Quantity Required	Line Stopper Unit No. 3SW			Line Stopper Unit No. 3SW-500
		4"	6"	8"	4"	6"	8"
		H-17356	H-17356	H-17356	H-17356	H-17356	H-17356
Drilling Machine	1	C1-36	C1-36	C1-36	C1-36	C1-36	C1-36
Stopping Machine	2	H-17340	H-17340	H-17340	H-17342	H-17342	H-17342
Gate Valve	2	83953	83953	83953	83721	83721	83721
Valve Adapter	2	83697	501224	502289	500021	63261	-
Drilling Machine Adapter	1	36545	36545	36545	83730	83730	83730
Cutter Hub	1	54526	54501	54653	54526	54501	54653
Shell Cutter	1	36472	36548	36521	36472	36548	36521
Pilot Drill	1	580585	580585	580586	580585	580585	580586
Steel Wedge Stopper*	2	89694	89696	89698	89694	89696	89698
Completion Machine	1	H-17346	H-17346	H-17346	H-17347	H-17347	H-17347
Plug AlignmentTool	1	83774	83250	83250	83774	83250	83250
Plug Inserting Tool	1	83772	83237	83237	83772	83237	83237
Plug Extracting Tool	1	83773	83238	83238	83773	83238	83238
Completion Plug Wrench	1	36404	36424	36424	36404	36424	36424
Thread Cleaning Tool	1	680360	89319	89319	680360	89319	89319
Inspection Flange	1	H-17619	H-17619	H-17619	H-17619	H-17619	H-17619

* Steel Wedge Stopper with urethane cover suitable for use with gas and petroleum.