H-17193

Mueller^® NO-BLO^® H-17193 Low Pressure Extension Stopper Fitting Weld Type - 250 psig.

Catalog number: H-17193

Specifications:

Sizes – 2", 3" and 4"
Forged Steel Body ASTM A105
Cast Iron Completion Cap ASTM A126 CL.B
For use on schedule 40 steel pipe only
O-ring sealed cast iron Completion Plug (4" size has equalizi
250 psig* (1724 kPa)

*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimension:

Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required	Outside Diameter of Pipe	Pipe Dimensions
Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required	Outside Diameter of Pipe	Maximum Wall Thickness	Minimum Wall Thickness	Maximum Inside Diameter
2"	1-3/4"	2.375"	.173"	.135"	2.129"
3"	2-3/4"	3.500"	.243"	.189"	3.157"
4"	3-3/4"	4.500"	.267"	.207"	4.131"

Replacement Parts:

Fitting Size	Completion Cap	Completion Plug Only	Completion Plug O-ring Seal	Equalizing Valve Assembly
2"	36310	502905	79268	N/A
3"	36312	502955	503164	N/A
4"	502944	502943	60192	580912

Equipment

How to select equipment:

Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

D-5™/DH-5™ Machine:

H-17193	2"		2"		3"		3"		4"
Control Valve	H-10914 2"		H-10917 2"		H-10914 3"		H-10917 4"		H-10917 4"
Bushing	-		-		-		-		-
Installation
Test Cap	36811		36811		36813		36813		502929
Completion Plug Wrench	581264		581264		581264		581264		36404
Drilling (D-5 /DH-5 Only)
MAOP*	100		100		100		100		100
Power Operator	H-604		H-604		H-604		H-604		–
Drilling Machine Adapter	36525		36525		505831		505831		505832
ToolAdapter	–		–		–		–		502963
Cutter Holder	509741		509741		509742		509742		509743
Shell Cutter Complete	80515	1-3/4"	80515	1-3/4"	89351	2-3/4"	89351	2-3/4"	89352	3-3/4"
Chip Sweeper	580902		580902		580902		580902		580902
Chip Sweeper Bushing	–		–		51062		51062		502939
Chip Sweeper Magnet	682081		682081		682081		682801		682801
Cutting Grease	88366		88366		88366		88366		88366
Honing Stone	682560		682560		682560		682560		682560
Components of Shell Cutter
Arbor	–		–		580907		580907		580907
Shell Cutter	79279		79279		504223		504223		504224
Pilot Drill	37896		37896		502932		502932		502932
Stopping (D-5 /DH-5 Only)
MAOP*	100		100		100		100		100
Machine Adapter	89349		89349		580918		580918		580906
Boring Bar Adapter	40438		40438		–		–		–
Rubber Stopper Holder	502900		502900		502937		502937		502937
Solid Rubber Stopper	580900		580900		580917		580917		580905
Replacement Rubber Only	502916		502916		502946		502917		580905
Rubber Stopper Lubricant	580657		580657		580657		580657		580657
Inserting
MAOP*	125		250		125		250		250
Machine Adapter	89349		59349		580918		580918		580906
Boring Bar Adapter	40438		40438		40438		40438		502937
Inserting Tool	83258		83258		580921		580921		580908
Extracting
MAOP*	125		250		125		250		250
Machine Adapter	89349		89349		580918		580918		580906
Extracting Tool	88384		88384		580919		580919		580913

*Maximum Allowable Operating Pressure