H-17190

Mueller^® NO-BLO^® Low Pressure Line Stopper Fitting Weld Type - 250 psig.

Catalog number: H-17190

Specifications:

Sizes – 3/4", 1" 1-1/4", 2", 3" and 4"
Forged Steel Body ASTM A105
Cast Iron Completion Cap ASTM A126 CL.B
For use on schedule 40 steel pipe only
O-ring sealed cast iron Completion Plug (4" size has equalizing valve)
Contoured base of fitting speeds installation
250 psig* (1724 kPa)

*This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Videos

Pipe dimension:

Size of Line Stopper Fitting	Outside Diameter Of Shell Cutter Required	Outside Diameter Of Pipe	Pipe Dimensions
Size of Line Stopper Fitting	Outside Diameter Of Shell Cutter Required	Outside Diameter Of Pipe	Maximum Wall Thickness	Minimum Wall Thickness	Maximum Inside Diameter
3/4"	13/16"	1.050"	.127"	.099"	.868"
1"	15/16"	1.315"	.150"	.116"	1.099"
1-1/4"	1-1/4"	1.660"	.157"	.122"	1.432"
2"	1-3/4"	2.375"	.173"	.135"	2.129"
3"	2-3/4"	3.500"	.243"	.189"	3.157"
4"	3-3/4"	4.500"	.267"	.207"	4.131"

Replacement Parts:

Fitting Size	Completion Cap	Completion Plug Only	Completion Plug O-ring Seal	Equalizing Valve Assembly
3/4"	37483	503443	503636	N/A
1"	37483	503444	79267	N/A
1-1/4"	38138	503445	40709	N/A
2"	36310	502905	79268	N/A
3"	36312	502955	503164	N/A
4"	502944	502943	60192	580912

Equipment

How to select equipment:

Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart
Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 Slide Gate Valve, H-10918 Steel Ball Valve.
Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be different for each operation.

E-5™/EH-5™ Machine

H-17190	3/4"	3/4"	1"	1"	1-1/4"	2"	2"
Control Valve	H-109141-1/4"	H-17025	H-109141-1/4"	H-17025	H-10914 1-1/2"	H-10914 2"	H-10917 2"
Bushing	-	78830 1-1/4"	-	78830 1-1/4"	-	-	-
Installation
Test Cap	79160	79160	79160	79160	79161	36811	36811
Drilling
MAOP*	125 psig	125 psig	125 psig	125 psig	125 psig	125 psig	250 psig
Power Operator	H-604	H-604	H-604	H-604	H-604	H-604	H-604
Machine Adapter	36733	-	36733	-	503435	89348	89348
Cutter Holder	-	-	-	-	503433	502900	502900
Shell Cutter Complete	580678 13/16"	580678 13/16"	580679 15/16"	580679 15/16"	580680 1-1/4"	89350 1-3/4"	89350 1-3/4"
Chip Sweeper	89570	-	89570	-	89570	580902	580902
Chip Sweeper Bushing	508691	-	508691	-	508692	-	-
Chip Sweeper Magnet	682080	-	682080	-	682080	682081	682081
Cutting Grease	88366	88366	88366	88366	88366	88366	88366
Honing Stone	682560	682560	682560	682560	682560	682560	682560
Components of Shell Cutter
Arbor	503637	503637	503637	503637	503643	526454	526454
Shell Cutter	503475	503475	503476	503476	503477	504222	504222
Pilot Drill	537192	537192	502906	502906	502906	502906	502906
Set Screw	92890	92890	92890	92890	92980	-	-
Stopping
MAOP*	100 psig	100 psig	100 psig	100 psig	100 psig	100 psig	100 psig
Machine Adapter	36733	-	36733	-	503435	89348	89348
Rubber Stopper Holder	503431	503431	503431	503431	503433	502900	502900
Solid Rubber Stopper	89568	89568	89569	89569	89130	580900	580900
Replacement Rubber Only	508695	508695	508694	508694	503440	502916	502916
Bypass Machine Adapter	-	-	-	-	89870	503680	503680
Rubber Stopper Holder	-	-	-	-	503433	502900	502900
Bypass Rubber Stopper	-	-	-	-	89877	89165	89165
Replacement Rubber Only	-	-	-	-	505553	503670	503670
Rubber Stopper Lubricant	580657	580657	580657	580657	580657	580657	580657
Inserting
MAOP*	125 psig	125 psig	125 psig	125 psig	125 psig	125 psig	250 psig
Machine Adapter	36733	-	36733	-	503435	89348	89348
Inserting Tool	83261	83261	83261	83261	83257	83258	83258
Extracting
MAOP*	125 psig	125 psig	125 psig	125 psig	125 psig	125 psig	250 psig
Machine Adapter	36733	-	36733	-	503435	89348	89348
Extracting Tool	80088	80088	80088	80088	83212	83262	83262

D-5™/DH-5™ Machine

H-17190	3/4"		1"		1-1/4"		2"		2"
Control Valve	H-10914 1-1/4"		H-10914 1-1/4"		H-10914 1-1/2"		H-10914 2"		H-10917 2"
Bushing	-		-		-		-		-
Installation
TestCap	79160		79160		79161		36811		36811
Completion Plug Wrench	96536		96536		96536		581264		581264
Drilling
MAOP*	125 psig		125 psig		250 psig		125 psig		250 psig
Power Operator	H-604		H-604		H-604		H-604		H-604
Machine Adapter	36195		36195		36196		89349		89349
Boring Bar Adapter	40438		40438		40438		40438		40438
Cutter Holder	-		-		503433		502900		502900
Shell Cutter Complete	580678	13/16"	580679	15/16"	580680	1-1/4"	89350	1-3/4"	89350	1-3/4"
Chip Sweeper	89570		89570		89570		580902		580902
Chip Sweeper Bushing	508691		508691		508692		-		-
Chip Sweeper Magnet	682080		682080		682080		682081		682081
Cutting Grease	88366		88366		88366		88366		88366
Honing Stone	682560		682560		682560		682560		682560
Components of Shell Cutter
Arbor	503637		503637		503643		526454		526454
Shell Cutter	503475		503476		503477		504222		504222
Pilot Drill	537192		502906		502906		502906		502906
Set Screw	92980		92980		98956		-		-
Stopping
MAOP*	100 psig		100 psig		100 psig		100 psig		100 psig
Machine Adapter	36195		36195		36196		89349		89349
Boring Bar Adapter	40438		40438		40438		40438		40438
Rubber Stopper Holder	503431		503431		503433		502900		502900
Solid Rubber Stopper	89568		89569		89130		580900		580900
Replacement Rubber Only	508695		508694		503440		502916		502916
Bypass Machine Adapter	-		-		89876		503681		503681
Boring Bar Adapter	-		-		-		40438		40438
Bypass Rubber Stopper Holder	-		-		503433		502900		502900
Bypass Rubber Stopper	-		-		89877		89165		89165
Replacement Rubber Only	-		-		505553		503670		503670
Rubber Stopper Lubricant	580657		580657		580657		580657		580657
Inserting
MAOP*	125 psig		125 psig		250 psig		125 psig		250 psig
Machine Adapter	36195		36195		36196		89349		89349
Boring Bar Adapter	40438		40438		40438		40438		40438
EZRelease Inserting Tool	83261		83261		83261		83258		83258
Extracting
MAOP*	125 psig		125 psig		250 psig		125 psig		250 psig
Machine Adapter	36195		36195		36196		89349		89349
Boring Bar Adapter	36198		36198		36198		-		-
Extracting Tool	80088		80088		80088		88384		88384

D-5™/DH-5™ Machine

H-17190	3"	3"	4"
Control Valve	H-10914 3"	H-10917 3"	H-10917 4"
Bushing	-	-	-
Installation
Test Cap	36813	36813	502929
Completion Plug Wrench	581264	581264	36404
Drilling
MAOP*	125 psig	250 psig	250 psig
Power Operator	H-604	H-604	H-604
Machine Adapter	580918	580918	580906
Boring Bar Adapter	-	-	502936
Cutter Holder	33316	33316	502937
Shell Cutter Complete	89351 2-3/4"	89351 2-3/4"	89352 3-3/4"
Chip Sweeper	580902	580902	580902
Chip Sweeper Bushing	51062	51062	502939
Chip Sweeper Magnet	682081	682081	682081
Cutting Grease	88366	88366	88366
Honing Stone	682560	682560	682560
Components of Shell Cutter
Arbor	580907	580907	580907
ShellCutter	504223	504223	504224
PilotDrill	502932	502932	502932
Stopping
MAOP*	100 psig	100 psig	100 psig
Machine Adapter	580918	580918	580906
Rubber Stopper Holder	502937	502937	502937
Solid Rubber Stopper	580917	580917	580905
Replacement Rubber Only	502946	502946	502919
Bypass Machine Adapter	89946	89946	89948
Rubber Stopper Holder	502937	502937	502937
Bypass Rubber Stopper	89945	89945	89947
Replacement Rubber Only	508425	508425	508324
Rubber Stopper Lubricant	580657	580657	580657
Inserting
MAOP*	125 psig	250 psig	250 psig
Machine Adapter	580918	580918	580906
Boring Bar Adapter	40438	40438	502937
Inserting Tool	580921	580921	580908
Extracting
MAOP*	125 psig	250 psig	250 psig
Machine Adapter	580918	580918	580906
ExtractingTool	580919	580919	580913

Unit #1 H-17135 Stopping Machine

H-17190	2"	2"	3"	3"	4"
Control Valve	H-10914 2"	H-10917 2"	H-10914 3"	H-10917 3"	H-10917 4"
Bushing	-	507781	-	507783	507784
Stopping
MAOP*	100 psig	100 psig	100 psig	100 psig	100 psig
Stopping Machine Adapter	89158	89158	503499	503499	89156
Rubber Stopper Holder	503495	503495	503496	503496	504133
Solid Rubber Stopper	580900	580900	580917	580917	580905
Replacement Rubber Only	502916	502916	502946	502946	502919
Bypass Rubber Stopper	89165	89165	89945	89945	89947
Replacement Rubber Only	503670	503670	508425	508425	508324
Rubber Stopper Lubricant	580657	580657	580657	580657	580657
Inserting
MAOP*	125 psig	125 psig	125 psig	125 psig	125 psig
Machine Adapter Nipple	89158	89158	503499	503499	89156
Inserting Tool	580524	580524	89151	89151	580908
Adapter	-	-	-	-	504133
Extracting
MAOP*	125 psig	125 psig	125 psig	125 psig	125 psig
Machine Adapter Nipple	89158	89158	503499	503499	89156
Extracting Tool	88474	88474	89152	89152	89153

*Maximum Allowable Operating Pressure