H-17012
H-17012
Mueller® H-17012 NO-BLO® Valve Changer for 1-1/2" & 2" meter valves on sch. 40 steel.
Catalog number: H-17012
Features:
- For changing out 1-1/2" and 2" Meter Valves installed on schedule 40 steel pipe
- Includes two plugging units, safety clamp, wooden storage chest (680288), Rubber Stopper Lubricant (580567), (1) extra Rubber plug for each size unit, and operating instructions (Form 8540)
- Fits most roundway and straightway valves
- O-ring sealed body and stem
- Maximum working pressure 60 psig** (414 kPa)
Demonstration Video
Dimensions:
The H-17012 plugging units can be used on valves (roundway or straightway) that have minimum port dimensions charted to the right, and if the outlet of the valve has F. I. P. threads.
Valve Size* | Minimum Port Width | Minimum Port Height |
1-1/2" | 25/32" | 1-19/32" |
2" | 1-5/32" | 2" |
Size* of Plugging Unit | 1-1/2" | 2" |
Plugging unit Part number | 83805 | 83928 |
a length of Rubber Plug | 4-1/8" | 3-1/8" |
B length from Ferrule Shoulder to taper | 17-7/16" | 17-7/16" |
Safety Clamp:
Safety Clamp Part Number | A | B | C |
83792 | 17-7/16" | 2-15/16" | 6-5/16" |
H-17012 Valve Changer Replacement Parts:
Part Name | Plugging Unit Size* | ||
1-1/2" | 2" | 2" | |
Plugging Unit Complete | 83805 | 83928 | 681431 (36") |
Stuffing Box assembly | 83807 | 83943 | 83943 |
Bottom Tube O-ring | 79344 | 503726 | 503726 |
retaining ring | 500567 | 501204 | 501204 |
Bleeder ring | 500568 | 501177 | 501177 |
Bleeder O-ring (2) | 78828 | 501205 | 501205 |
Shaft crank assembly | 83806 | 501181 | 501181 |
Shaft Nut | 51101 | 501180 | 501180 |
Shaft Tube Washer | 51110 | 501182 | 501182 |
Top Shaft O-ring | 79514 | 78818 | 78818 |
Shaft Tube assembly | 83803 | 83942 | 681432 |
Shaft assembly | 83808 | 83941 | 681433 |
Rubber Plug | 500561 | 501183 | 501183 |
Shaft Ferrule | 500560 | 501179 | 501179 |
Shaft Ferrule Retaining nut | 53863 | 53935 | 53935 |
Part Name | Part Number | |
Safety Clamp Complete | 83792 | 682732 - extended length |
Retaining Collar | 500582 | 500582 |
Retaining Collar Pin | 500580 | 500580 |
Shaft clamp Positioning Sleeve (2) | 500576 | 500576 |
Shaft Tube Clamp Arm Assembly (2) | 83793 | 83793 |
Clamp Bar | 500585 | 537486 |
Pipe Clamp Assembly | 83798 | 83798 |
Locating Pin (0.875" length) | 50763 | 50763 |
Clamp Bar Spacer | 500575 | 500575 |
Clamp Bar Nut | 33571 | 33571 |
** this is the maximum working pressure of this equipment. During the use of this equipment, the line pressure must not exceed the amount indicated.