H-17010
H-17010
Mueller® H-17010 NO-BLO® Valve Changer for 3/4", 1", & 1-1/4" meter valves on sch. 40 steel.
Catalog number: H-17010
Features:
- For changing out 3/4" to 1-1/4" Meter Valves installed on schedule 40 steel pipe
- Includes three Plugging Units, Safety Clamp, Wooden
Storage Chest (680350), Tailpiece Kit (682993), Rubber
Stopper Lubricant (580657), (1) extra rubber plug for
each size unit, and Operating Instructions (Form 8540) - Fits most roundway and straightway valves
- O-ring sealed body and stem
- Maximum working pressure 60 psig** (414 kPa)
Demonstration Videos
Dimensions:
The H-17010 plugging units can be used on valves (roundway or straightway) that have mini- mum port dimensions charted to the right, and if the outlet of the valve has F.I.P. threads.
Valve Size* | Minimum Port Width | Minimum Port Height |
3/4" | 13/32" | 23/32" |
1" | 17/32" | 31/32" |
1-1/4" | 11/16" | 1-9/32" |
Size* of Plugging Unit | 3/4" | 1" | 1-1/4" |
Plugging unit part number | 83962 | 83963 | 83964 |
a length of rubber plug | 2" | 2-5/8" | 3-3/8" |
B length from ferrule shoulder to taper | 12-9/16" | 12-9/16" | 12-9/16" |
Safety Clamp:
Safety Clamp Part Number | A | B |
682597 | 20" | 6-1/2" |
** this is the maximum working pressure of this equipment. During the use of this equipment, the line pressure must not exceed the amount indicated.
Optional Extended Length Plugging:
- Used for changing out 3/4", 1 or 1-1/4" Meter Valves installed on schedule 40 steel pipe when additional travel is required.
- Extended length Safety clamp also available and preferred when using these longer Plugging units.
- Fits most roundway and straightway valves
- O-ring sealed body and stem
- Maximum working pressure 60 psig** (414 kPa)
These plugging units can be used on valves (roundway or straightway) that have minimum port dimen- sions charted to the right, and if the outlet of the valve has F.I.P. threads.
ValveSize* | Minimum Port Width | Minimum Port Height |
3/4" | 13/32" | 23/32" |
1" | 17/32" | 31/32" |
1-1/4" | 11/16" | 1-9/32" |
Size* of Plugging Unit | 3/4" | 3/4" | 1" | 1" | 1" | 1-1/4" | 1-1/4" |
Plugging unit Part number | 580617 | 681427 | 580618 | 83866 | 580788 | 580621 | 681430 |
(a) length of Rubber Plug | 2" | 2" | 2-5/8" | 2-5/8" | 2-5/8" | 3-3/8" | 3-3/8" |
(B) length from ferrule shoulder to taper | 18-13/32" | 31-9/16" | 18-13/32" | 27-5/8" | 30-27/32" | 18-13/32" | 29-29/32" |
Safety Clamp (extended length):
Safety Clamp Part Number | A | B |
682857 | 38" | 6-1/2" |
* this is the maximum working pressure of this equipment. During the use of this equipment, the line pressure must not exceed the amount indicated.
H-17010 Valve Changer Replacement Parts:
Part Name | Plugging Unit Size* | ||
3/4" | 1" | 1-1/4" | |
Plugging Unit Complete | 83962 | 83963 | 83964 |
Stuffing Box assembly | 83281 | 83282 | 83283 |
Bottom Tube O-ring | 79514 | 72239 | 79344 |
retaining ring | 53777 | 50990 | 51014 |
Bleeder ring | 50936 | 50947 | 51003 |
Bleeder O-ring (2) | 40709 | 79351 | 79479 |
Shaft crank assembly | 83276 | 83277 | 83278 |
Shaft Nut | 51134 | 51249 | 51101 |
Shaft Tube Washer | 51159 | 51059 | 51110 |
Top Shaft O-ring | 53856 | 43973 | 79514 |
Shaft Tube assembly | 83966 | 83968 | 580392 |
Shaft assembly | 83965 | 83967 | 580391 |
Rubber Plug | 51243 | 51100 | 51113 |
Shaft Ferrule | 51189 | 51288 | 51106 |
Shaft Ferrule Retaining nut | 52969 | 53832 | 53863 |
Part Name | Qty Req'd | Part Number |
Safety Clamp Complete | - | 682597 |
Pivot Sleeve | 2 | 537866 |
Set Screw | 2 | 97763 |
Pivot Coupling | 2 | 537865 (Pivot Coupling) |
Shaft tube clamp arm assembly (2) | 2 | 682854 |
Clamp Bar | 1 | 682598 |
Pipe clamp assembly | 1 | 83977 |
Short Locating Pin (2.875" length) | 1 | 501282 |
Long Locating Pin (4.375" length) | 1 | 501283 |
Thumb Screw | 2 | 95297 |
Hex Nut | 2 | 94825 |
Extended Length Plugging Unit Replacement Parts:
Part Name | Plugging Unit Size* (extended length) | |||||||
3/4" | 3/4" | 3/4" | 1" | 1" | 1" | 1-1/4" | 1-1/4" | |
Plugging Unit Complete | 580617 24" | 83865 29" | 681427 36" | 580618 24" | 83866 33" | 580788 36" | 580621 24" | 681430 36" |
Stuffing Box assembly | 681183 | 681181 | 681181 | 83282 | 83282 | 83282 | 83283 | 83283 |
Bottom Tube O-ring | 79514 | 79514 | 79514 | 72239 | 72239 | 72239 | 79344 | 79344 |
Retaining ring | 53777 | 53777 | 53777 | 50990 | 50990 | 50990 | 51014 | 51014 |
Bleeder ring | 50936 | 50936 | 50936 | 50947 | 50947 | 50947 | 51003 | 51003 |
Bleeder O-ring (2) | 40709 | 40709 | 40709 | 79351 | 79351 | 79351 | 79479 | 79479 |
Shaft crank assembly | 83276 | 83276 | 83276 | 83277 | 83277 | 83277 | 83278 | 83278 |
Shaft Nut | 51134 | 51134 | 51134 | 51249 | 51249 | 502609 | 51101 | 51101 |
Shaft Tube Washer | 51159 | 51159 | 51159 | 51059 | 51059 | 502607 | 51110 | 51110 |
Top Shaft O-ring | 53856 | 53856 | 53856 | 43973 | 43973 | 43973 | 79514 | 79514 |
Shaft Tube assembly | 580615 | 83867 | 681428 | 580620 | 83868 | 580789 | 580622 | 580792 |
Shaft assembly | 580616 | 83869 | 681429 | 580619 | 83870 | 580790 | 580623 | 580793 |
Rubber Plug | 51243 | 51243 | 51243 | 51100 | 51100 | 51100 | 51113 | 51113 |
Shaft Ferrule | 51189 | 51189 | 51189 | 51288 | 51288 | 51288 | 51106 | 51106 |
Shaft Ferrule Retaining nut | 52969 | 52969 | 52969 | 53832 | 53832 | 53832 | 53863 | 53863 |
Part Name | Qty Req'd | Part Number |
Safety Clamp Complete | - | 682857 |
Pivot Sleeve | 2 | 537866 |
Set Screw | 2 | 97763 |
Pivot coupling | 2 | 537865 |
Stop Clamp Assembly | 2 | 682854 |
Clamp Bar | 1 | 682795 |
Pipe clamp assembly | 1 | 83977 |
Thumb Screw | 2 | 95297 |
Hex Nut | 2 | 94825 |