H-18051

Mueller^® H-18051 Autosafe^® Tee.

Catalog number: H-18051

Features:

Weld x weld - size 250
sizes* – 3/4" x 3/4"
Mueller GAs-PHusE^® Device size 250
Forged steel body AsTM A105
steel completion cap AIsI 12L14
Bronze completion plug/Gas-Phuse Assembly
Weld inlet
Outlet prepared for butt weld same size as outlet and socket weld one size smaller than outlet
1440** psig (9930 kPa)

*First size is size of inlet, second is size of outlet.
**This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

_
Catalog PDF

Equipment

How to select equipment:

Find chart on following pages containing desired combination of fitting and installation machine (shown in bold type at top of each page and chart). Note: for a given fitting there may be more than one machine and chart.
Under inlet size of fitting to be installed, select catalog number for type of control valve to be used. Options may include one or more of the following: H-10914 Bronze Gate Valve, H-17025 Control Chamber, H-10917 slide Gate Valve, H-10918 steel Ball Valve.
Under selected control valve, column lists equipment necessary for each operation on chosen size of fitting. Note: MAOP (Maximum Allowed Operating Pressure) provided for each operation must not be exceeded. MAOP may be differ- ent for each operation.

Dimensions:

Dimensions	*Size of Autosafe Tee**
Dimensions	3/4" x 3/4"
A	3-5/8"
B	1-3/4"
C	3/4"
D	3/8"

Replacement Parts:

Replacement Parts	*Size of Autosafe Tee**
Replacement Parts	3/4" x 3/4"
Completion Cap	504404
stem/GAs-PHusE	580722

*First size is size of inlet, second is size of outlet.

E-5™/EH-5™ Machine

H-18051	3/4"	3/4"	3/4"
Control Valve	H-10914 1-1/4"	H-17025	H-10918 1-1/4"
Bushing	-	502232	-
Installation
Test Cap	51361	51361	51361
Drilling
MAOP*	125 psig	125 psig	E-5 = 500 psig EH-5 = 1200 psig
Power Operator	H-604	H-604	H-604
Machine Adapter	36733	-	36733
Reducing Bushing	49681	502232	49681
Drill	502517 1/2"	502517 1/2"	502517 1/2"
Drill Holder	502501	502501	502501
Guide Nut	502503	502503	502503
Cutting Grease	88366	88366	88366
Honing stone	682560	682560	682560
Stopping
MAOP*	125 psig	125 psig	E-5 = 500 psig EH-5 = 1200 psig
Machine Adapter	36733	-	36733
Reducing Bushing	49681	502232	49681
steel shut Off Tool	502260	502260	502260
Inserting
MAOP*	125 psig	125 psig	E-5 = 500 psig EH-5 = 1200 psig
Machine Adapter	36733	-	36733
Reducing Bushing	49681	502232	49681
EZ Release Tool	580760	580760	580760
Extracting
MAOP*	125 psig	125 psig	E-5 = 500 psig EH-5 = 1200 psig
Machine Adapter	36733	-	36733
Reducing Bushing	49681	502232	49681
Extracting Tool	580759	580759	580759

D-5™/DH-5™ Machine

H-18051	3/4"	3/4"
Control Valve	H-10914 1-1/4"	H-10918 1-1/4"
Bushing	-	-
Installation
Test Cap	51361	51361
Drilling
MAOP*	125 psig	D-5 = 500 psig DH-5 = 1200 psig
Power Operator	H-604	H-604
Machine Adapter	36195	36195
Reducing Bushing	49681	49681
Drill	40397 1/2"	40397 1/2"
Drill Holder	36324	36324
Cutting Grease	88366	88366
Honing stone	682560	682560
Stopping
MAOP*	125 psig	D-5 = 500 psig DH-5 = 1200 psig
Machine Adapter	36195	36195
steel shut Off Tool	502260	502260
Boring Bar Adapter	40438	40438
Inserting
MAOP*	125 psig	D-5 = 500 psig DH-5 = 1200 psig
Machine Adapter	36195	36195
Reducing Bushing	49681	49681
EZ Release Inserting Tool	580760	580760
Boring Bar Adapter	40438	40438
Extracting
MAOP*	125 psig	D-5 = 500 psig DH-5 = 1200 psig
Machine Adapter	36195	36195
Reducing Bushing	49681	49681
Extracting Tool Adapter	52598	52598
Extracting Tool	580759	580759

*Maximum Allowable Operating Pressure