1. Home
  2. Products
  3. Line Stopper Fittings
  4. Flanged
  5. H-17357

H-17357

public://uploads/wysiwyg/Line Stopper Fitings-Flanged-H17357.PNG

H-17357

Mueller® Side-Out Line Stopper Fitting Welding Type - 720 PSIG.

Catalog number: H-17357

Specifications:

  • Sizes – 10", 12"
  • For use on steel pipe only
  • O-ring sealed steel (ASTM A216 WCB) Completion Plug with equalizing valve
  • Flange, Completion Cap, fitting top and bottom halves are forged steel (ASTM A105)
  • Pipe pup included for alternative welding options
  • Class 400 flange complies with dimensional requirements of ANSI B16.5
  • 720 psig**(4964 kPa) maximum working pressure at 100F (38C)
**This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Demonstration Video

Pipe Dimension:

Size* of Line Stopper Fitting

Outside Diameter of Shell Cutter Required

Outside Diameter of pipe

Pipe Dimensions

Maximum Wall thickness

Minimum Wall thickness

Maximum Inside Diameter

10"

12-1/2"

10.750"

No limit

No limit

No limit

12"

12-1/2"

12.750"

.375"

.188"

12.374"

Drilling/LineStopping Machine combinations that can be used to install and stop-off H-17357 Fittings:

Drilling Machine

Line Stopper Unit

Unit No. 4SW

H-17357

C1-36

10" and 12"

 Replacement parts:

Fitting Size*

Completion Cap

Test plug

Completion Cap Bolts and Nuts(No. Required)

Completion Cap Gasket

Completion plug Assembly

O-ring Seal

Pipe plug

10"

47648

64134

501194 (20)

46434

83488

46428

528760

12"

47648

64134

501194 (20)

46434

83488

46428

528764

*Nominal

Equipment required to install and stop-off H-17357 welding Line Stopper Fitting:

Tool Name

Quantity Required

Line Stopper Unit No. 4SW

10" x 12" H-17357

Drilling Machine

1

C1-36

Stopping Machine

2

H-17440

Gate Valve

2

83565 or 83318†

Drilling Machine Adapter

1

83323

Cutter Hub

1

682782††

Shell Cutter

1

682780

Pilot Drill

1

682781

Steel Wedge Stopper*

2

89704

Completion Machine

1

H-17445

Plug AlignmentTool

1

83250

Plug Inserting Tool

1

83237

Plug Extracting Tool

1

83238

Completion Plug Wrench

1

36424

Thread Cleaning Tool

1

89321

Inspection Flange

1

H-17619

*Steel Wedge Stopper with urethane cover suitable for use with gas and petroleum.
† The 83565 Gate Valve has a maximum working pressure of 275 psig and the 83318 Gate Valve has a maximum working pressure of 500 psig.
†† Thick Wall 12" Shell Cutter option available.