200 Series

200 Series

Mueller® 200 Series Pipe-Saver® Clamps. The 200 Series Pipe-Saver® Clamp comes in 3", 6", 9", 12", and 18" lengths, in single section to fit 1/2" - 8" stand- ard steel pipe, and in two sections to fit 10" - 24" standard steel pipe. Cemented-in gaskets are available with a choice of smooth or gridded surfaces, and regular or full coverage. High carbon steel bolts with corrosion-resistant plating are standard; stainless steel bolts optional.

  • Typical 200 Series Pipe-Saver® Clamps
  • 220 Two Section Clamp with Regular Gasket Coverage
  • 218 Single Section Clamp with Regular Gasket Coverage
  • 211 Single Section Clamp with Full Gasket Coverage
  • 212 Single Section Clamp with Full Gasket Coverage

Features:

  • Maximum gas working pressure for properly installed clamps with nuts tightened to 500 inch-pounds of torque: 1/2"-4" = 175 psig; 6"-8" = 100 psig; 10"-12" = 75 psig; 14"-16" = 50 psig; 18"-24" = 30 psig
  • Repair holes and splits
  • Choice or smooth or gridded, regular or full coverage gaskets.
  • Heavy bolt shoulders prevent turning in lug.
  • Steel bolt has rolled, spin-fit threads to speed installa- tion.
  • Heavy, hex nut provides more thread contact for greater strength.
  • Type 304L stainless steel band
  • Ductile iron lugs are shaped to provide uniform clamping pressure on pipe.

_
Catalog PDF

 

IMPORTANT: MUELLER PIPE REPAIR CLAMPS have demonstrated their capability to seal against gas pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of the bolt tightening (where there is more than one bolt) as well as the type of extent of pipe damage, surface condition of the pipe, environmental conditions and installation workmanship.
 
Metallic components of repair clamps, including stainless steel, corrode at widely variable rates depending upon many factors, such as installation outdoors or underground, composition of surrounding atmosphere/soil, presence of stray currents, moisture or chemicals, etc. Consequently, repair clamps must be assumed to have a finite service life. Consult with a corrosion professional to determine the life expectancy of this repair clamp taking into consideration all appropriate factors in the application. The piping system designer should determine the suitability of this type product on your particular system. Unforeseen failure of this product could result if these precautions are not taken. Mueller Co. can provide additional material specification information on request by contacting Customer Service: 800-798-3131.

Mueller 200 Series Pipe-Saver Pipe Repair Clamps - for 1/2" through 24" standard steel pipe.

To specify the catalog number, use the charts to select the following information for the desired clamp:

1. Style number
2. Length
3. Size number

Example :
The catalog number for a 220 Style Clamp, 3" long for 1-1/2" steel pipe is 220-03-0190.

Clamp Style Number:

 

Style number

 

Typeof Gasket

 

Gasket Coverage

Bolts

 

Sizes available*

CorrosionResistive Plating

Stainless Steel

210

Smooth

Full

X

 

1/2"-24"

211

Smooth

Full

 

X

1/2"-24"

212

Gridded

Full

X

 

1/2"-24"

213

Gridded

Full

 

X

1/2"-24"

218

Smooth

Regular

X

 

1-1/2"-24"

219

Smooth

Regular

 

X

1-1/2"-24"

220

Gridded

Regular

X

 

1-1/2"-24"

221

Gridded

Regular

 

X

1-1/2"-24"

*Clamps available to fit specific size standard steel pipe within this nominal size range.
 

Clamp Length and Clamp Size Number:
 

Std. Steel PipeSize††

ClampSize Number

Std. SteelPipe O.D.

Numberof ClampSections

1/2"

0084

0.840

1

3/4"

0105

1.050

 

1"

0131

1.315

 

1-1/4"

0166

1.660

 

1-1/2"

0190

1.900

 

2"

0237

2.375

 

2-1/2"

0287

2.875

 

3"

0350

3.500

 

3-1/2"

0400

4.00

 

4"

0450

4.500

 

5"

0556

5.563

 

6"

0662

6.625

 

8"

0862

8.625

 

10"

1075

10.750

2

12"

1275

12.750

 

14"

1400

14.000

 

16"

1600

16.000

 

18"

1800

18.000

 

20"

2000

20.000

 

24"

2400

24.000

 


Single Section Clamps 1/2"-8" O.D.:

Clamp Lengths Available

Number of Bolts

3"

1

6"

2

9"

3

12"

4

18"

6


Two Section Clamps 10"-24" O.D.:

Clamp Lengths Available

Number of Bolts

3"

2

6"

4

9"

6

12"

8

18"

12

†† Nominal Sizes.
 

IMPORTANT: MUELLER PIPE REPAIR CLAMPS have demonstrated their capability to seal against gas pressures commonly encountered in distribution systems. Smaller diameter clamps of a given design can seal against higher pressures than larger ones. In addition, the pressure that a clamp can contain is effected by the torque applied to the bolts, the uniformity of the bolt tightening (where there is more than one bolt) as well as the type of extent of pipe damage, surface condition of the pipe, environmental conditions and installation workmanship.

Metallic components of repair clamps, including stainless steel, corrode at widely variable rates depending upon many factors, such as installation outdoors or underground, composition of surrounding atmosphere/soil, presence of stray currents, moisture or chemicals, etc. Consequently, repair clamps must be assumed to have a finite service life. Consult with a corrosion professional to determine the life expectancy of this repair clamp taking into consideration all appropriate factors in the application. The piping system designer should determine the suitability of this type product on your particular system. Unforeseen failure of this product could result if these precautions are not taken. Mueller Co. can provide additional material specification information on request by contacting Customer Service: 800-798-3131.