H-17264

Mueller^® Bottom-Out Stopper Fitting Welding Type - 960 PSIG

Catalog number: H-17264

Specifications:

Sizes – 3", 4" x 3"**, 4", 6", 8", 10", 12"
For use on steel pipe only---with bottom opening sized for standard schedule 40 steel pipe
O-ring sealed steel (ASTM A216 WCB) Completion Plug with equalizing valve
Flange, fitting top and bottom halves are forged steel (ASTM A105)
Class 400 flange complies with dimensional requirements of ANSI B16.5
960 psig*** (6618 kPa) maximum working pressure at 100F (38C)

** The 4" x 3" size fitting is a 4" fitting that has been modified to fit 3" steel pipe. This fitting uses 4" tools and equipment.
***This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments. Refer to charts on following pages.

Catalog PDF

Sizes & Operation

Demonstration Video

Pipe Dimension:

Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required	Outside Diameter of pipe	Pipe Dimensions
Size of Line Stopper Fitting	Outside Diameter of Shell Cutter Required	Outside Diameter of pipe	Maximum Wall thickness	Minimum Wall thickness	Maximum Inside Diameter	I.D. Size of Bottom Opening
3"	3-1/4"	3.500"	No limit	.188"	3.124"	3.062"
4" x 3"**	4-1/4"	3.500"	No limit	No limit	No limit	4.031"
4"	4-1/4"	4.500"	No limit	.188"	4.124"	4.031"
6"	6-1/4"	6.625"	.432" (sch. 80)	.250"	6.125"	6.062"
10"	12-1/2"	10.750"	No limit	No limit	No limit	9.687"
12"	12-1/2"	12.750"	.375" (std.wt)	.188"	12.374"	11.625"

Drilling/LineStopping Machine combinations that can be used to install and stop-off H-17264 Fittings:

Drilling Machine	Line Stopper Units
	Unit No.2	Unit No.3	Unit No.3SW	Unit No. 3SW-500	Unit No. 4SW
	H-17264
C1-36	4" x 3" and 4"	6"	4" x 3", 4", 6", 8"	4" x 3", 4", 6", 8"	10" and 12"

Replacement parts:

Fitting Size	Completion Cap	Test plug	Completion Cap Bolts And Nuts (No. Required)	Completion Cap Gasket	Completion plug Assembly	O-ring Seal
3"	64203	64134	43912 (8)	43959	83489	43922
4" x 3"**	42039	64134	46710 (8)	36377	83490	43917
4"	42039	64134	46710 (8)	36377	83490	43917
6"	79898	64134	43908 (12)	62945	83491	79895
10"	47648	64134	501194 (20)	46434	83488	46428
12"	47648	64134	501194 (20)	46434	83488	46428

*Nominal
** The 4" x 3" size fitting is a 4" fitting that has been modified to fit 3" steel pipe. This fitting uses 4" tools and equipment.
***This is the maximum pressure of the fitting installed in the line at 100F for Class Locations 1, 2, 3 and 4 as defined in D.O.T./CFR TITLE 49 PART 192. It may be necessary to reduce the line pressure during the drilling, stopping or plugging operations to the maximum working pressure of the machine or its attachments.

Equipment

Equipment required to install and stop-off H-17264 welding Line Stopper Fittings:

Tool Name	Quantity Required	Line Stopper Unit No. 2		Line Stopper Unit No. 3
Tool Name	Quantity Required	3" H-17264	4" H-17264	6" H-17264
Drilling Machine	1	C1-36	C1-36	C1-36
Stopping Machine	2	H-17235	H-17235	H-17335
Gate Valve	2	88611	88611	83953
Valve Adapter	2	37149	37153	501224
Drilling Machine Adapter	1	36343	36343	36545
Cutter Arbor	1	88101	-	-
Cutter Hub	1	-	54526	54501
Shell Cutter	1	36463	36472	36548
Pilot Drill	1	36464	580585	580585
Solid Rubber Stopper	2	88610	88614	682365
Bottom Bypass Rubber Stopper	2	80064	81496	-
Full Bypass Rubber Stopper	2	680514	680515	682364
Bottom Stopper	2	681990	681991	681993
Completion Machine	1	H-17246	H-17246	H-17345
Plug Alignment Tool	1	83522	83522	83519
Plug Inserting Tool	1	83520	83520	83517
Plug Extracting Tool	1	83521	83521	83518
Completion Plug Wrench	1	36404	36404	36424
Inserting Bar Ext. Spacer	2	505554	79403	36991
Inserting Bar Ext. Sleeve	2	505555	79402	36992
ToolAdapter	2	-	-	37197
Retaining Screw Wrench	1	-	-	88475
Thread Cleaning Tool	1	89316	89317	89318
Inspection Flange	1	H-17619	H-17619	H-17619

Tool Name	Qty.Req'd.	Line Stopper Unit No. 3SW			Line Stopper Unit No. 3SW-500			Line Stopper Unit No. 4SW
		4" x 3"	4"	6"	4" x 3"	4"	6"	10"and12"
		H-17264	H-17264	H-17264	H-17264	H-17264	H-17264	H-17264
Drilling Machine	1	C1-36	C1-36	C1-36	C1-36	C1-36	C1-36	C1-36
Stopping Machine	2	H-17340	H-17340	H-17340	H-17342	H-17342	H-17342	H-17440
Gate Valve	2	83953	83953	83953	83721	83721	83721	83318
ValveAdapter	2	83697	83697	501224	500021	500021	63261	-
Drilling Machine Adapter	1	36545	36545	36545	83730	83730	83730	83323
Cutter Hub	1	54526	54526	54501	54526	54526	54501	682782†
Shell Cutter	1	36472	36472	36548	36472	36472	36548	682780
Pilot Drill	1	580585	580585	580585	580585	580585	580585	682781
Steel Wedge Stopper*	2	89694	89694	89696	89694	89694	89696	89704
Bottom Stopper	2	681992	681992	681994	681992	681992	681994	681997**
Completion Machine	1	H-17346	H-17346	H-17346	H-17347	H-17347	H-17347	H-17445
Plug Alignment Tool	1	83774	83774	83250	83774	83774	83250	83250
Plug Inserting Tool	1	83772	83772	83237	83772	83772	83237	83237
Plug Extracting Tool	1	83773	83773	83238	83773	83773	83238	83238
Completion Plug Wrench	1	36404	36404	36424	36404	36404	36424	36424
Thread Cleaning Tool	1	680360	680360	89319	680360	680360	89319	89321
Inspection Flange	1	H-17619	H-17619	H-17619	H-17619	H-17619	H-17619	H-17619

*Steel Wedge Stopper with urethane cover suitable for use with gas and petroleum.
**Used only on 1999 or later enhanced fittings.
† Thick Wall 12" Shell Cutter option available.